Articles

NSK NAKANISHI PRODUCTS

		ULTRA-PRECISION MULTI-PURPOSE MICRO-GRINDER
		(Electrically Driven) 1,000~35,000 min^-1 • Digital display enhances further safety and efficiency. • Compact and functional design made easy to carry around. • Soft touch switches permit easy operation and long service life.

		ULTRA-PRECISION HIGH TORQUE AIR GRINDER
		(Pneumatically Driven) 0~30,000 min^-1 • High torque air motor assembled with special vane mechanism. • Two types of air motors can be selected depending on the application. • 1/4 and 1/15 Speed Reducers (RG-01, RG-02) can be connected.

		ULTRA-PRECISION HIGH TORQUE BRUSHLESS HAND GRINDER
		(Electrically Driven) 1,000~50,000 min^-1 • Realized high output power of 200W and high durability product by the harmonious combination of a hall-element brushless DC motor and high grade electronic circuitry.

		PORTABLE MICROMOTOR GRINDER
		(Electrically Driven) 2,000~30,000 min^-1 • Light weight, compact and easy to carry around. • Ideal for work when no power supply is available. • Recharging time : 1 hr. When fully charged the unit offers approximately 1 hour of continuous operation.

		HIGH TORQUE PENCIL TYPE AIR GRINDER
		(Pneumatically Driven) 0~60,000 min^-1 • Durable and quiet high-efficient air grinder. • The IMPULSE Series also offers 45 degree and 90 degree models. Choose the type that best fits your application requirements.

		ULTRA-PRECISION HIGH SPEED AIR TURBINE GRINDER
		• Most suitable for delicate processing works due to no lube air turbine handpiece. • 45^o Angle Type (with Chip Air Mechanism) (lubrication required)

		ULTRASONIC POLISHER
		• SHEENUS can be used for grinding, polishing and mirror finishing on a wide range of materials from aluminum dies to cemented carbide dies. It is also perfect for plastic molds, press, casting, forging, trimming and header dies. • This tool quickly removes hard layer of EDM deposits and polishes difficult areas such as complex corners and ribs.

		HIGH PERFORMANCE ULTRA-SONIC CUTTER *Not available in Europe
		(Electrically Driven) 1,000~35,000 min^-1 • Oscillating Frequency : 39.5KHz, Max. Output Power : 30W • Intricate and accurate cutting with a light touch. • Machine attachment type is also available.


		Deburring & FinishingTools(About 4,300 items)

		Ultra High-Speed Air Turbine Spindle
		High Speed 150,000min^-1 Suitable cutting tool diameter; Less than R0.5mm Ball End Mill • Negligible spindle expansion • Very High Feed Rates are possible • Spindle Accuracy is within 1

		Ultra-Precision Burushless Motor & Spindle (Electric system)
		• 20,000-80,000 min^-1 Max.output 300W • Motor /Spindle can be controlled and monitored by external input-output connector. • LED Load Monitor ,and motor speed is displayed precisely,digitally. • A Safety Relay that complies with EN standard is installed as standard equipment. • When changing the voltage, you don’t need to exchange the fuse.(115V-230V) • Front panel can be detached and extended ; Max.4m length(Option) • Incorporates all the functions of the ASTRO-E 800 system

		Multi Purpose Use Air Motor & Spindle (Air System)
		• Enable a wide variety of operations by the combination of various kind of 22mm spindles. • Available for grinding, drilling, milling, slitting, chamfer and deburring operations.

		Ultra High-Speed Air Bearing Spindle(Air Bearing)
		• Ideal for extremely high precision, small diameter machining applications. • The ABS Series has a non-contact type of bearing which means the spindle has a very long service life because of low friction and wear. • The ABS Series are finished with a very high-accuracy process to ensure extremely low vibration and very high rotating accuracy. • The ABS-70P is a pulley driven spindle that incorporates an air bearing.

		High Torque Air Motor Spindle (Air System)
		Short Body, High Torque, High-Precision machining spindles • Ideal for use on NC, CNC machines. • Perfect for Robotic application. AMXL Series light type weighs only 60-70% as much as the normal series. • Easily convert a single purpose machine into a multi-purpose machine. • Simple installation, just supply lubricated air.

		Multi-purpose pulley type spindle for machine attachment (pulley type)
		Designed with dramatically increased rigidity specifically for drilling, milling, slitting and grinding applications. • Designed for maximum rigidity for grinding & milling. • Available in a wide variety of sizes from 20mm(O.D.) to 70mm(O.D.) to make them easy to mount on almost any machine for milling, OD grinding. • The housing is made from precision ground stainless steel(SUS416). • Available from low to high speed for applications. • Labyrinth seals are used in the front and rear of the spindles to protect the spindle from chips and grinding debris. An air purge inlet is builtinto the body of the spindle to give added protection when operating in severe conditions.

		Brushless motor for small diameter milling /drilling (Electric system)
		Upgrade your existing NC milling machines and CNC machining centers to high speed machines. • 6,000-50,000 min^-1 Max. output 250W • Less than 2mm drilling and milling with extremely good surface finishes • BT,NT,CAT, IT and HSK A taper are available.

		High Speed Air Motor Spindle (Air System)
		High Speed Air Motor Spindle (Air System) Perfect for grinding as well as drilling and milling with tools less than 1mm diameter. • 40,000 min^-1 Max.output 60W • Up to 4mm shank tooling can be used • Utilize Ultra-Precision, Angular bearings to maximize rigidity

		Air Motor Spindle (Air System)
		• BANTAM150 Max.15,000min^-1 Max. Output 132W • BANTAM250 Max.26,000min^-1 Max. Output 105W

		High-Speed Jig Grinder (Air System)
		Milling Machine into Jig Grinding Machine, Lathe into Internal Grinding Machine. • Suitable for internal grinding jig borer, jig milling machine and lathe • Can be used for the high-speed rotating portions of various kinds of special purpose machines.

		Reciprocating Grinding System Internal Grinding Unit (Air System)
		The Falcon System can be easily installed on a lathe for high precision taper grinding, end grinding and ID grinding. • Adjustable stroke up to 55mm(G-1),127mm(G-2) for end /ID grinding • Automatic lubricating system, Oil viewer, Non-radial play mechanism • Quiet operation with silencer